Skype
MSN
E-mail:sales@goodsec.com
 
 
EAS Products
    RF/AM Hard Tags
    RF Soft labels
    AM DR labels
    RF Antenna
    AM Antenna
    RF/AM Detachers
    RF/AM Deactivators
    Pins/Lanyards
    Ink Tags
    Special Tags
    Bottle Tags
Security Displaying Products
    Security Mobile Phone
    Security Camera
    Security Computer
    Security Other Products
Current page Security Displaying Products
         
Intelligent , multifunctional anti-theft device for displaying products
Item No.:AS09A
This product is researched & developed based on of frequent theft in electronic products stores (Laptop, Desktop, MP3, Mobile phone, Walkman etc), which suitable for all marketplaces. With it, IT sellers can keep products safe and avoid loss.
 
 
 
Product Descprition
 
This product is automatically controlled by mircrocomputer, chip memory at any time. Every port could be used independently. It has more functions than common break alarm/USB alarm, and the best advantage differing this product from others is that alarm will not stop until unlocking the controller,
even if recovering to initial condition or restarting the controller. The whole process of surveillance and alarming is monitored by circuit.
This is real USB output with 8 ports and connecting wire could be disconnected randomly., easy to assemble and suitable for personal computers, laptop/desktop computers display, electronics stores, electronic appliances marketplace.
Port: USB port, break alarm port, stick port (The 3 kinds could be chosen according to your request) . This product can be customized as port of other electronic products
 
 

Main Parameters

1. Working Volt: DC9-12V
2. Standby Current: 75mA 
3. Alarm Current: 350mA
4. Alarm Volume: 120 db
5. Inductive Mode: wire break alarm
 
Product Features:
 
1.  The product is made up of USB, connecting cable and the host. When the equipment is separated from the USB interface, or the connection cables are pulled broken, the host alarm buzzer hints. The two function occurs at the same time to achieve the double protections on one commodity;
2.   The host is set by 8 ports output which can be extended to connect with all kinds of interface, USB directly plug into the computer or devices with USB interface. No matter when the equipment is "turn on"  or  "turn off" , it can detect the security situation and be in a state of anti-theft; the connected cable can plug into or be winding on the device to obtain wire break alarm effect.
3.   This product has the self-checking function, the factory default settings for every port is in the off state, turn on this equipment and keep pressing reset button for 5 seconds, the main engine will detect every port and shut down free ports by itself, the ports with device connecting will be at the anti-theft condition.
4.   With memory function in case of  power-down. If the main engine is power off, when it's electrified again, it can memorize the situation before power-down, and it will alarm if theres any change.
5.   Once the alarm is triggered, it can not be released whatever restore or turn off and on again. You have to press "reset" button to release it. So this product has higher anti-theft safety coefficient to avoid stealer making any tricks with it.
6.   With anti-theft function in case of  power-down. You can buy the built-in high-performance rechargeable batteries which can automatic converse to battery charge, that the internal power can maintain alarm.
7.  With the remote control function, simple operation, and more humanized design (remote function optionally available)
8.   Corresponded to each port's LED working instructions, the anti-theft status is in clear.
9.   Meet the needs of laptop, desktop computers, mobile phones, MP3, and walkman---such kinds of commodity anti-theft alarm.
 
Product  Configuration:
Standard configuration: host 1pc,  DC12V switching power supply 1pc, high-decibel alarm horn 1pc , 2-meter USB cable 8 pc, disconnect wire 1 pc. 
Optional accessories: Remote Control, back-up rechargeable battery, 2-meter USB cable, 0.5-meter USB disconnect wire, paste sensor
Host Size: 170 x 113 x 30 mm
Packing Size: 220 x 150 x 85 mm
Product Weight: 850g
 
   Order       Back    
 
 
 
Wonderful Business co.,ltd. All Rights Reserved. ICP:05040403