Alarm Standalone Security for Camera
Model No: STA02
Color: Black
Structure: Standalone
Accessory:AM Remote Unlocker
Introduction:
STA02 is alarm, standalone security product for displaying camera.
Function:
1. Break line alarm: if any any cable is cut removed, the alarm will be activated
2. Sensor alarm: 2 sensor switches on the rear of the product and the bottom of the STA02.
3. LED Green, it is working. LED Red, it is alarming.
4. Status Test: AM Remote Unlocker can test the alarm status.
5. Low-power design: Standby time reach 1 year.
Specifications
Sleep current: 1.5uA
Standby current: 2uA
Security state current: 2uA
Alarm status current: 20mA
Alarm Volume: 95db
Remote control distance: 5cm
Operating Voltage: DC3V
Installation and usage
STA02 Installation:Peel 3M tape of STA02 base, fix on flat showcase.
Camera Installation: Peel 3M tape of sensor, fix on camera. Use special screw fix camera. Then stick mini mouse sensor.
Set alarm: AM Remote Unlocker face the SAT02 base, press the button  within 5cm. The LED turn green the alarm is set.
Close alarm: AM Remote Unlocker face the SAT02 base, press the button  within 5cm. The alarm is closed.
Alarm test: AM Remote Unlocker face the SAT02 base, press the button within 5cm. The LED turn green. Then press the button  within 5cm to test alarm. Press the button can close the alarm test.
Product Size:
Whole Hight: 150mm, Sensor Diameter: 70mm, Base Diameter: 100mm
Knighthead: Ellipse, Upper Diameter: 27mm, Under Diameter 34mm |
